Glazed Porcelain Tiles are made through the glazing process. The process od glazing involves covering tiles body with coatingor glaze, typically made of vitrified lead glass and oxides that result in an opaque surface.

Both are Good option as porcelain tiles. Porcelain's thick and tough surface has made polishing an effective sustitute for a glazed surface. As a result, a tile can be fired, polished and them printed to create a gloss without glaze. However, unlike regular glazed tiles, polished porcelain may require sealing.

Certainly, Porcelain tiles tend to be slippery. Whether they are glazed or unglazed, the majority of tiles have the potential to be slippery when wet, although matte-finished tiles are much less likely to be so, and textured or grip-finished tiles ( R11 surface) are non-slip since they are made specifically for outdoor use.

yes the 60x120cm or 2x4ft or 24x48in is expensive than other variety of 60x120cm. At Barson we will provide you at best option for your purchase.

Porcelain Tiles are strong, but they are also challenging to drill or cut unless you do not have experience. This can be counted as a disadvantage because for them to be carved into any required shape, specialized and powerful instruments are needed.

Glazed and Unglazed Porcelain Tiles, both are a good fit depending on your requirement.

Glazed Porcelain Tile is resistant to wear, scratching, chipping, and cracking because of its exceptional hardness and density.

Although Porcelain Tiles are Water  waterproof. our 60x120 Glazed Porcelain Tiles water absorption <0.5% .This means that if you immerse them in water for a long enough time, ultimately it will not absorb.

The Thickness of the 60x120cm Glazed Porcelain Tile Ranges from 8mm – 10mm. For detail visit on packing detail.

Maintaining Glazed Porcelain Tiles is easy. White vinegar or a commercial cleaner is safe for Glazed Porcelain Tiles, if you ever get stains on the surface. To completely remove the stain, you can use a warm water wash with vinegar that has been diluted. After wiping down the area, let it sit for 10 minutes, and then you can rinse it with some clean, warm water.